Marine Direct Current Electronic Drivers for Power LED

  • Marine IP20 independent driver, for indoor use.
  • Class II protection against electric shock following direct or indirect contact.
  • Supplied with terminal cover and cable retainer.
  • Opposite input and output terminal blocks (terminal area 2,5mm2).
  • Single terminal block on primary and secondary circuit.
  • Clamping screws on primary and secondary circuits for cables with diameter: min. 3mm - max. 8mm.
  • Driver can be secured with slot for screws.
  • Protections:
    - against overheating and short circuits;
    - against mains voltage spikes;
    - against overloads.
  • Cannot be switched on and off on secondary circuit for power LED.
  • Suitable for the supply of power LED.

Reference Norms EN 55015; EN 61000-3-2; EN 61347-1 EN 61347-2-13; EN 61547; VDE 0710-T14
Voltage AC 100 ÷ 240 V
AC Operation Range

110 ÷ 264V

AC Operation Range 176 ÷ 264 V
Frequency 50 - 60Hz
Power 0 ÷ 15 W
Lamps Power LED