SHELL

Marine Direct Current Dimmable Electronic Drivers for Power LED

  • Marine driver for bulit-in use, indoor use, class III.
  • It accepts input PWM regulating signals.
  • Extremely low safety voltage (9÷32V).
  • Class III protection against electric shock following direct or indirect contact.
  • Input and output terminal blocks on opposite sides.
  • Single terminal block on primary and secon-dary circuit (terminal area 1,5mm2).
  • Supplied with cables on secondary circuits for connection.
  • Driver can be secured with slot for screws.
  • Ultra compact size.
  • Protections:
    - against overheating and short-circuits;
    - against mains voltage spikes;
    - polarity switching at input;
    - against overloads.
  • Current regulation -8% +5% including temperature variations.
  • Can be switched on and off on secondary circuit for power LED.
  • Suitable for the supply of power LED.

Reference Norms EN 55015; EN 61347-1; EN 61347-2-13; VDE 0710-T14
Voltage DC 9 ÷ 32
Power 0 ÷ 10 W
Lamps Power LED

Download