Marine Direct Current Dimmable Electronic Drivers for Power LED

  • Driver for bulit-in use, indoor use, class III.
  • Extremely low safety voltage 7÷32V.
  • Dimmable by means of driver with choked tension PWM.
  • Absence of impulse current during dimming.
  • Class III protection against electric shock fol lowing direct or indirect contact.
  • Cables on primary (cables length 10cm).
  • Cables on secondary with female connector (cables length 10cm).
  • Cable with male connector which can be supplied separately.
  • Driver can be secured with slot for screws.
  • Ultra compact size.
  • Protections:
    - against overheating and short circuits;
    - polarity switching at input;
    - fuse for each channel;
    - against mains voltage spikes;
    - against overloads.
  • Current regulation ± 5% including temperature variations.
  • Can be switched on and off on secondary circuit for power LED.
  • Suitable for the supply of power LED.

Reference Norms EN 55015; EN 61347-1; EN 61347-2-13; VDE 0710-T14
Voltage DC 7÷ 32
Power 3 x 5 W
Lamps Power LED