DIM 24PS
The DIM 24PS module is equipped with an integrated microcontroller used to control 4 different 12/24VDC lighting sources, in dimmer or on/off mode. The module is rated to work with voltage driven monochromatic LEDs (with or without driver added) or with a PWM signal (if 3-wires driver provided). It can also be used to control 12/24VDC incandescent and halogen lamps. Each channel handles up to 10A loads.
Marine Dimmer Module 12/24VDC
- 4 dimmer outputs or on/off (on positive) with memory 12/24VDC (PWM 200Hz)
- 8 dry contact inputs
- Electronic protection against overload and short circuit
- DIN rail installation (6M)
- Detachable terminal blocks
- Conformal coating treatment
The module has 8 inputs that can be connected to any kind of dry contact, pushbuttons and sensors. The inputs can be used to manage the outputs in the 2 modes provided, dimmer or on / off. The setting of on board dipswtiches allows to link up to 4 outputs, to reach a maximum load of 40A.
| Electronic power supply | 11-28VDC |
| Maximum electronic requirements | 0,6W (25mA @24VDC, 50mA @12VDC) |
| Outputs power supply | 11/24VDC |
| Load ratings | 10A each, PWM 200Hz |
| Dimensions (W x H x D) | 106x58x90mm (6 M) |
