YBR 50 AC
Tubular motor with electronic limit switch equipped with Yachtica® EasyBUS
input on the motor head. All the motors functions can be managed through
the Yachtica® Cabot programming software. It is possible to guarantee perfect
alignment between motors installed in the same environment and also in the
presence of several motors.
The motor is equipped with dry contacts for direct operation even in case of lack
of EasyBUS connection.
Extremely silent, with a minimum level of vibration during operation, to
ensure maximum acoustic comfort. Its small size allows to be installed even
in the tightest spaces and to reduce wiring from the electrical panel. Soft Start
and Soft Stop functions electronically controlled allow to set different levels
of acceleration and deceleration in approach to the limit switch. Extended
operation without the risk of overheating.
Tubolar Motor 100-240Vac
- Encoder
- Electronic limit switch
- Soft Start/Soft Stop
- Dry contact
- Silent
- 100-240 Vac, 6 Nm, 20 rpm
- diam. 35 mm
Electrical specifications
| Power Supply (Vac/Hz) | 100-240 / 50-60 |
| Power Supply (VDC) | 20-28 VDC |
| Absorbtiom (A) | 0,8 |
| Power (W) | 50 |
| Power consumption in stanby (W) | <0,5 |
Performance
| Torque (Nm) | 6 |
| Rated speed (rpm) | 20 |
| Max speed (rpm)* | 32 |
| Min speed (rpm) | 10 |
| Noise (dBA)** | 35 |
| Numbers of turns before stopping | <150 |
| Continuos operating time (min) | 6 |
| Lifted weight (kg)*** | 22 |
Dimensional data
| Lenght (L) (mm) | 744 |
| Cable lenght (m) | 1,5 |
| Weight of motor (kg) | 1,5 |
| Operating temp (°C min/max) | 0÷60 |
| Pack dimensions (mm) | 795x100x100 |
Protection class IP30.
*If the set speed is higher than the rated speed, motor torque is automatically reduced by 50%.
**Noise levels have been measured in accordance with en iso 3745, en iso 3746 and en 60704-1, expressing the sound power emitted by the source in dba.
***Indicative value calculated with a 40 mm diameter roller. The actual value may vary depending on the specific application
