YBR 50 DC
Tubular motor with electronic limit switch equipped with Yachtica® EasyBUS input on the motor head. All the motors functions can be managed through the Yachtica® Cabot programming software. It is possible to guarantee perfect alignment between motors installed in the same environment and also in the presence of several motors.
The motor is equipped with dry contacts for direct operation even in case of lack of EasyBUS connection.
Extremely silent, with a minimum level of vibration during operation, to ensure maximum acoustic comfort. Its small size allows to be installed even in the tightest spaces and to reduce wiring from the electrical panel. Soft Start and Soft Stop functions electronically controlled allow to set different levels of acceleration and deceleration in approach to the limit switch. Extended operation without the risk of overheating.
Tubolar Motor 24Vdc
- Electronic limit switch
- Soft Start/Soft Stop
- Dry contact
- 24 Vdc, 6 Nm, 20 rpm
- diam. 35 mm
|Power Supply (Vac/Hz)||24|
|Power Supply (VDC)||20-28 VDC|
|Power consumption in stanby (W)||<0,5|
|Rated speed (rpm)||20|
|Max speed (rpm)*||32|
|Min speed (rpm)||10|
|Numbers of turns before stopping||<150|
|Continuos operating time (min)||6|
|Lifted weight (kg)***||22|
|Lenght (L) (mm)||472|
|Cable lenght (m)||1,5|
|Weight of motor (kg)||1,1|
|Operating temp (°C min/max)||0÷60|
|Pack dimensions (mm)||595x100x100|
Protection class IP30.
*If the set speed is higher than the rated speed, motor torque is automatically reduced by 50%.
**Noise levels have been measured in accordance with en iso 3745, en iso 3746 and en 60704-1, expressing the sound power emitted by the source in dba.
***Indicative value calculated with a 40 mm diameter roller. The actual value may vary depending on the specific application.