MCP 804LX
The MCP 804LX module is equipped with an integrated programmable microcontroller used to control and dimm 4 different 12/24VDC lighting sources, on positive.The module is rated to work with voltage driven monochromatic LEDs (with or without driver added). Each channel handles up to 10A loads.
Lighting Management Module 12/24VDC
- 4 programmable dimmer on positive outputs 12/24VDC (PWM 400 Hz adjustable)
- Current measure on each outputs, with limit settable with Cabot Software
- 8 programmable dry contact inputs
- EasyBUS communication
- Stand-alone mode
- Programmable functionality via Cabot
- Advanced managing of overload and short circuit
- Optoisolation between electronic and power
- Control and monitoring display on the front panel
- Dipswitches to set standard programming
- DIN rail installation (6M)
- Detachable terminal blocks
- Conformal coating treatment
In addition to a standard programming that allows using it in stand-alone mode, connecting push-buttons or sensors to the 8 dry contact inputs, it is possible to customize the programming using the Yachtica® software Cabot. The module can communicate with other EasyBUS products by the system BUS. A useful display on the front panel, with buttons, allows setting some parameters and the outputs monitoring and control. The measurement of the current delivered is provided on each output, and it is possible to set, using the Cabot software, a limit beyond which the output opens. The recall of the programmed functions can be done by push-buttons, smartphone/tablet or touch screen.
| Electronic power supply | 11-28VDC |
| Maximum electronic requirements | 0,6W (25mA @24VDC, 50mA @12VDC) |
| Outputs power supply | 11/24VDC |
| Load ratings | 10A each, PWM 400Hz |
| Dimensions (W x H x D) | 106x58x90mm (6 M) |
